High-Tech Nitrous
Home of Nitrous High-Technology
Links with "Integrity"
These are links and sites that we support. Any of these sites will in fact be governed by the basic "Integrity" factor. IMO, not all sites are created equal. We wish we could say more...
Here is a quote (thanksStrokerAce at HardCorels1.com) that states our feelings best, on the issue of "Integrity", here at RNS:
"For you who believe all you read, I caution you - you are daily being brainwashed for profit by extremely effective psychology with very little regard to factual accuracy. In short, you're at the mercy of the world's greatest bullshit artists with the morals of a stray tomcat."
- Smokey Yunick
-
MEMBERS Supported Web Sites
We have so many tech savoy members here, that adding an area where they can bring their sites, or sites they are associated with, to light, was a no brainier. Enjoy, and submit.
-
Share Your Company here, or Favorite Site robertsnitrousservice.com/Members only. Feel free to post your site's links and/or any site you feel worthy about. We need tech sites that deal with other than GM, FOMOCO and Harley. This could be a great promotion tool for your site, as we are going Web mapped and traffic is picking up daily. Networking is key here, and big name contacts are already at hand, and I share freely. Just submit your link by E-Mail or through the site for my approval. Add the description you would like showing. Your name and info will also show, unless you would like to keep that on the lamb. One thing however, no porn type stuff. I am no prude, but I have kids and grand kids, parents and others whom go to my site. Thanks
Posted at 4:18am on Mon, Dec 21 2009 -
My Slips www.myslips.comAn example: This is a site that is really cool. We can host all of our 1/4 mile runs. Then you can early see what/when/where to try and improve say the 60'er? Also, it has a other member linked chat room so as to talk runs with all. A great tool, IMO, for the serious racer, and well, the not so serious. Robert
Posted at 5:05am on Mon, Dec 21 2009 -
Ranger Acceleration www.rangeracceleration.com/Clutch_Care.htmlIf you want to know how to get your Corvette to put up Fast Times, then this is the site. I have used these techniques to great success and highly recommend this site.
Posted at 4:28am on Sun, Dec 27 2009
-
-
Supported Nitrous and Technical Sites
These are the site that you can be assured of getting the right and correct information. They are not vendor run and thus biased on buying what they are promoting. Some sites could care less if the correct technical information is presented. The Mods are there simply to protect the vendors and what the vendors say, right or wrong, IMO.
-
Nitrous Forum nitrousforum.com/This is the Internets only true all Nitrous forum, AND WE HAVE ADDED A BIKE/N2O FORUM. Might be the web's only dedicated bike spray forum? It covers all makes and models, with heavy support toward the late model EFI platforms. It's small currently, but growing daily. Please join up and add your N2O experience and insight.
Posted at 7:15pm on Sun, Nov 23 2008 -
Yellow Bullet www.yellowbullet.com/forumAn advanced nitrous section. Many of the countries top racers hang here. The nitrous section is hosted by Induction Solutions. This has become one of my favorite sites.
Posted at 10:02pm on Sun, Dec 07 2008 -
Corvette Forums forums.corvetteforum.com/index.phpThis site has dedicated N2O forums for each generation of the Corvette IE: C3, C4, C5 and C6. One of the best no bullshit sites on the Internet.
Posted at 7:21pm on Sun, Nov 23 2008 -
HardCore LS1 www.hardcorels1.comThis is another straight shooter high tech site for the serious hot-rodder concerning the LSx platform. There is a dedicated Power Adder forum that includes N2O. If you want some in depth correct information on any angle of building your LSx engine, this is the place. Very knowledgeable tech heads run this site.
Posted at 7:24pm on Sun, Nov 23 2008 -
Turbo Technology Inc forum.turbotechnologyinc.comA Tacoma based Full turbo kit manufacturing company/shop. They build the worlds quickest/fastest stock long-block LS6 twin turbo set-ups via the TTi X kit. They build many of the NW top race cars, nitrous as well as turbo cars. Their forum includes a small N2O forum.
Posted at 7:28pm on Sun, Nov 23 2008 -
FQuick Garages www.fquick.com/robert56This is my garage site at FQuick. it includes a more complete look at my car, the Z06 test mule. Included on my page is a section on some of the old race cars I grew up around (Fathers-Robert Sr.). Also, anyone can join up there and host their present as well as past cars. A very nice format for hosting your pictures and cars info.
Posted at 7:32pm on Sun, Nov 23 2008 -
SVT Performance www.svtperformance.comOur personal favorite FOMOCO site. It covers all the late model EFI platforms: Lightning, Cobra, GT 500, Mach 1 and so on. The "Blower Bistro" forum includes nitrous.
Posted at 7:38pm on Sun, Nov 23 2008 -
Camaro Z28 www.camaroz28.comIt has a pretty good general tech nitrous forum. Also in the stickies is a pretty good wet vs dry thread, although needs some updating on recent technology advances. Worth a read through however.
Posted at 7:41pm on Sun, Nov 23 2008 -
FasterProms www.fasterproms.netThis tuning company is and always has been on the cutting edge. Jeremy Formato has led the way where dry nitrous tuning is concerned. Five or six years ago when I first became serious on how to make the dry before the MAF tuning work, we came across a thread by Jeremy and Al Jones. It was how they were making a 700 plus HP dry tune work. I was working with propane as a kicker fuel to help help stabilize the often fluctuating A/F dry issue, which today is no longer a problem. Anyway, their tuning prowess led to me dropping the propane and getting HP Tuner. I will tell you that in those days very few understood how the MAF worked. The rest is history and the dry is now easier than the wet in most cases. The reason I support this site is the cutting edge knowledge base.
Posted at 8:24pm on Sun, Nov 23 2008
-
Amber Alert
Featured Products
Recent Videos
