High-Tech Nitrous

Attention: All products are being moved to my new web store which will make things easier and better for all concerned. We will likely save a page like this to go in to details on the tech of it all. But to purchase, it will be one click away. I know it's been 1/2 azzed for some time and cost many sales, but sales have been secondary, at least in the past, to helping others in general. We will do better from now on. There is a dedicated phone line coming. Check the new "Web Store" and you will see what direction we are taking. Hopefully, some of you will help support my efforts by considering purchasing your nitrous needs here.

Robert 

Watch for some new Dual Stage Package Kits Coming. Other custom full NANO/HSW  combined/complete Kits coming too. The MUSTANG Plate Kits are shipping at this time. 

This section will host all kits, wether they are wet or dry, direct port or nozzle style, they will all be here. Later we will brek the kits up into specific wet/dry fromats. Also, we will go vehicle specific. If you don't see the kit your looking for, just E-Mail or phone as it may just not be on the site yet. Please give any input on kits or packages you would like to see. I do have a couple more nitrous companies lined up and we will be putting some "Select Parts" type kits together taking the best from one area and adding it to the new "Select" kit. Watch for these special kits soon.

We will pay the PAY-PAL Fee for now.

Quick Links:

• Mustang '05-'09 Plate Kit
• Roberts Single Stage Dry, Plate Kit/NANO C5/C6
• Roberts Dual Stage Dry I, Plate Kit/NANO C5/C6
• Roberts Dual Stage Dry II, Plate kit/NANO C5/C6
• Sudden Impact Wet Plate Kit 78mm 
• Sudden Impact Dry Plate Kit  78mm and 90mm 
• Basic Wet Nozzle Starter Kit
• Dual Stage Unpgrade Kit
• Wet and Dry Plate Conversions
• NOS 5177 Dry, and NOS Wet Plate Kits
• NOS LS1/LS6 Wet Plate Kit
• NOS LS2 Wet Plate Kit
• HSW GM Wet or Dry Add a Plate Kits
• more coming

The "Sudden Impact Dry Plate Kit" is absolutely the most innovative kit (first kit below) to hit the market in the history of the dry technology. The kit includes the equally innovative "Interface", an Air/Fuel controller, along with automatic timing pull, electronic controller. This is my #1 choice for a kit that is easy to set-up, of great quality and valued priced like no other, not to mention the inherent safety that only dry technology can provide. I have a lot of install and test/tune data on these products and will soon introduce a method to link to my personal notes and findings. This I hope will help the end user understand all of the options that are available. Many are not even advertised at this point as we are still discovering some remarkable options that the Interface and MicroEdge can provide. Please, if you discover something that one of these controllers can do, let me know and you will get full credit. The other innovative product to hit the market that can greatly enhance the performance of the Sudden Impact kit is the NANO. NANO is a nitrogen assist system that keeps bottle pressure at it's optimum PSI atall times. We see 25% gain in down track average HP. Want to go faster with the same jetting, well NANO is the answer. The Sudden Impact Dry technology and the NANO technology  are both High-Tech cutting edge products and work remarkably well together. It's a win/win for the end users. This combo is my #1 pick for street/strip applications.

Check the 360° spray pattern, which these plates are famous for, on the LSx platform. You will not find a better pattern for equal distribution, bar none. GM LSx, H2O Plate VIDEO-click here

Here's another new innovative product for the '05-'09 Mustang, dual inlet/outlet 360° spray pattern Plate. Mustang N2O Plate VIDEO-click here

Please be patient as more items will be added, yes wet kits, and Pay-Pal link, credit card-pay here and that sort of thing, stay tuned. Also, prices will be be adjusted soon to show the real bargains we will offer. Thanks Robert

This kit is being put together as an optional all in one kit with cost as a consideration. This does not mean we are cheaping out on quality, quite the opposite is true. The kit is very complete and you will likely need only various wire and connectors, un-like most on the market that require so very much more to complete. All tuning can be done by the end user with out an after market tuner program. Please see the features of both the Interface and the MicroEdge in the Electronics section as they offer so very much to the kit overall.

This brings up a good point, I am putting a wiring diagram together that includes all the items below and will be specifically for the C5/C6 platform. This will certainly help in the install, as this is probably the biggest area people have problems with-wiring and to many different products without a clear indication where to wire what into, problem solved. This kit also does not require a bottle heater and the extra hassle that can be-wiring.

Also, no need for a FPSS, as we have a A/F shut down feature which can use the stock narrow band sensor or your after market wide band sensor.  No need for a WOT switch either as the built in, to the MicroEdge controller, TPS does the N2O activation job. 

The kit includeds:

• "Sudden Impact" Dry Plate Kit, Complete 78mm, 90mm, 92mm (see below)
• "Interface" Fuel and Timing Controller
• Full NANO Kit 3000/4500 Series Universal (Optional)
• Bottle Heater Kit (Optional if not going NANO later)
• Purge Kit for 3-Port PowerMax N2O Solenoid
• Purge Kit Wiring
• Purge Kit Aluminum Tube
• "MicroEdge" WS/TPS/Lean shut down
• NHRA Blow down Kit
• Large Billet N2O Filter
• NGK TR6 Plugs
• C5/C6 Custom Switch panel
• Full/Complete Wiring Diagram
• SS Jetting, 75, 100, 125, 150hp (larger on request)
• Upgradable to dual Stage (see the dual stage upgrade kit)
• FREE PAY-PAL

Products Included

Pictures of some of the Included items

  78/90/92mm:  LS1/LS2/LS3/LS6/LS7 C5 Corvette-F-Body-TBSS-GTO-CTS~V-Truck Platforms

Description: LS1 F-Body, GTO, CTS-V, C5 Corvette, and Truck Platforms complete 78mm EFI Wet Nitrous Plate Kit (C5 Corvette kit includes spacer kit for power steering reservoir). Features full 360 degree perimeter style spray pattern for less turbulent intake charge compared to single/multi port spray pattern plates; please see the video link in the lead paragraph; showing the perimeter style spray pattern. This kit comes complete, ready to be installed. All electrical connectors are weather tight (heat shrinkable) and includes full color installation manual. Fully adjustable from 25 HP - 150 HP.

HighLights:

Jets included: 75hp, 100hp, 125hp and 150hp a total of 8 stainless Steel Jets. (stainless jets will not corrode and thus vary in size over time like brass)

Please Note: Aftermarket smooth bellow is required and will need to be trimmed in F-Body applications. Other applications (GTO | LS1 truck) may need to slightly trim their cold air intake. Jetting is rated at the Rear Wheels (RWHP). F-Body kit includes intake manifold solenoid brackets, all others include universal solenoid brackets.

Sudden Impact Kit contents (most single items can be seen in accessories section for further details):

You Must State Your Vehicle Type When Ordering.

Price:              $599.99

Mustang Plate kits are for Shipping, and  the only on the Internet to be is here for now. Details and prices should be posted 12-11-08, and orders are being taken at this time. 

 Yes the Mustangs are starting to be covered with the revolutionary HSW 360° spray patterns utilized in their plate kits.

Here's a teaser video to get an idea of what is to come.

Much, much more coming on this new innovative product. It's really time for us Mustang fans to be srviced with some good dedicated FoMoCo products. Watch for electronics packages similar to what is offered for the GM LSx platform to the market in the near future. Such a great time to be in the nitrous Hot-Rodding circle.

Mustang Plate kit Spray Video

The dual stage series one will be a less expensive multi stage option. Finalizing parts/prices currently.

The series two dual dry will be a more advanced option for those wishing to go fast. deatils are being worked out currently.

This will be a package deal with or with-out NANO for the Wet fans and similar in contents to the Single dry above.

This is a universal nozzle style wet kit. This is a great starter kit of the same quality as all other kits we offer but in a smaller and thus less cost package. We can add to this kit as the dollars become available, or when ready to expand. This kit is complete and ready to install.

Components are Anodized Aluminum & Stainless Steel, no Brass or Plated Brass

Included Jet Sizes: 75, 100, 125, and 150 RWHP. Total of Eight (8) Stainless Steel Jets.

Price:       $414.99   (dry @ $349.99)

This kit will allow ungrading your existing single stage dry kit into a full dual stage when your ready. Coming soon.

We have the basic "plate only" to add to your out dated existing Dry or Wet nozzle kit. Yes, the single/dual nozzle kits have become dated technology. The 360° spray pattern offered with the Plate technology offers much better atomization and distribution. Also a much less turbuleant intake charge is to be had. All of these advantages offer a better safety margin and increased power per any given HP level.

Price:    $249.99

This kit was originaly designed for the F-body, however, it works equally well on the C5. The 5177 is the Dry kit that revolutionized the Dry market concerning the LSx platform. See the wiring section for modding the 5177, although not approved by NOS and may limit your warranty. The Interface and 5177 are a match made in heaven, a tuners dream come true.

The stock fuel pump should be adequate, but it should be capable of meeting NEW pump specs. If unsure, replace. Use only premium grade pump gasoline (92+ octane) or unleaded racing fuel. In many instances, a free–flowing exhaust system may benefit performance. WARNING: DO NOT use aftermarket devices that advance ignition timing, as detonation may occur. Actual performance gains will vary depending on the engine's condition and configuration.

Part #: 05177NOS

Price:  $640.99

Part # 05177NOS N/B

Price: $554.99 (no bottle)

Fits the LS1 f-Body and the C5 Corvette. The NOS LS1 plate system uses a billet plate with no spray bars. This unique design allows better atomization which prevents fuel puddles in your Manifold and provides the best cylinder to cylinder distribution for maximum power. This is no ordinary low HP kit. The plate and Solenoids supplied will easily support 200HP.

Kit includes stainless Jets for 100,125 and 150HP, 6AN nitrous line, large nitrous and fuel solenoids, throttle body gaskets and bolts, Corvette micro–switch bracket, fuel and nitrous hoses, a 10lb Bottle and various wiring components to complete installation.

Price:      $655.99

Price:  $515.99 (no bottle) 

The NOS LS2 plate system uses a billet plate with no spray bars. This unique design allows better atomization which prevents fuel puddles in your Manifold and provides the best cylinder to cylinder distribution for maximum power. This is no ordinary low HP kit. The plate and Solenoids supplied will easily support 200HP.

Installation Notes

Part #: 05169NOS

Price: $699.99

This is the conversion kit for existing systems where you may want to upgrade your existing nozzle kit. It comes complete with jetting, misc application specific parts full color intstall manual and your choice of 78mm, 90mm, 92mm plate.

All LSx platforms supported:  Trucks/Y-bodies/F-bodies/GTO/G8/CTS-V/TBSS

Features full 360 degree perimeter style spray pattern for less turbulent intake charge compared to single/multi port spray pattern plates; please follow this LINK for a video showing the perimeter style spray pattern.

Complete kit below

Price:   $209.99